JL Audio C3-650 6.5" 150w Component Car Speakers
How To Build A Bundle
The following accessories can be bundled with your purchase by checking the green ‘Include with Product’ button. You can add as many items to your order as you require and then simply ‘Add to Cart’ to complete order.
- Product Info
JL Audio C3-650 6.5" 150w Component Car Speakers
We Think YOU Should Know
- 12 Month JL Audio Australian Warranty
- Risk Free Purchase Guarantee (bottom of page)
- 4 Ohm
- C3 Series 6.5" Component Car Speakers
- 150 Watts Peak Power
- 75 Watts RMS Power
- Polypropylene cone
- Butyl rubber surround
C3 Convertible Component Systems
There are times when an installation calls for a separate woofer and tweeter and other times when a coaxial is the better approach. With the new Evolution® C3 Convertible Component Systems, the same product can be deployed in either configuration, delivering outstanding audio quality in each application.
C3's are all new from the ground up and deploy JL Audio's full suite of technology advancements and patents to deliver unsurpassed value, performance and reliability.
The C3 woofers are 100% new designs aimed at raising the bar for midbass performance, dynamic stability and fidelity of response.
C3 woofers feature oversized, 1.2-inch diameter woofer voice coils to deliver superior power handling, reduced dynamic compression and more distortion-free output. Long coil winding lengths create a very wide dynamic envelope in which linear behavior is maintained. JL Audio's patented Elevated Frame Cooling technology allows air to flow directly over the top-plate and onto the voice coil windings during operation. These features further reduce distortion and improve clean output capabilities.
Balancing the entire motor system is JL Audio's DMA-optimization process, in which we apply powerful computer modeling systems to refine the complex behavior of the motor system under power. (This is the same motor design approach that gives our subwoofer drivers their special edge.)
The C3 woofer cones have been carefully shaped to control response and reduce undesirable breakup characteristics. High-grade butyl rubber surrounds and Conex® spiders ensure years of reliable, high-fidelity performance.
In each C3 woofer design, the motor and moving assemblies are aligned and supported by an injection-molded composite basket (frames) that delivers exceptional rigidity while also permitting architectural features that aid in alignment during assembly. This ensures assembly precision and unit-to-unit consistency, which are critical to maintaining the C3's tight acoustic tolerances.
The C3 tweeter is a true, edge-driven 1-inch (25mm) silk dome that excels on or off axis and offers very smooth and flat frequency response to well beyond 20 kHz. Silk is an ideal tweeter diaphragm material thanks to its light weight, strength, inherently good damping characteristics and environmental stability. These benefits combine to deliver very good efficiency, smooth response and sparkling high frequency detail without the harshness common in many competitive products.
Driving this silk dome is a powerful motor using high-temperature grade neodymium and ferroluid-cooling for superior efficiency and long-term fidelity.
Each C3 tweeter is built onto a carrier that can be mounted with a simple twist into a flush or surface mount fixture (for separate mounting applications), or onto the woofer's pole piece, when used as a coaxial.
Each C3 System includes specifically-designed, true 2-way outboard crossovers, precisely optimized to deliver smooth, predictable in-car response.
The C3 crossover networks feature premium Mylar® capacitors, air-core inductors and precision resistors. All C3 crossover component parts are held to less than 5% tolerance. This attention to detail and parts quality combines to give you consistent performance at all power levels.
The design of the C3 crossover networks is simple in topology (1st order low-pass / 2nd order high-pass), but highly sophisticated in implementation. The networks offer adjustments for mid-range presence (three increments), plus four adjustable tweeter levels. This flexibility allows you (or your installer) to account for vehicle acoustics, tweeter placement as well subjective factors.
Getting your C3's dialed in couldn't be simpler.
Peace of Mind Purchase Guarantee & Declaration of Warranty
This product is supplied directly via JL Audio Australia and enjoys the FULL benefits of the 'JL Audio Australian Warranty'. (You may also be entitled to other consumer warranties as provided by the Australian Consumer Guarantee and these entitlements are not limited by this warranty). In the event that this product should fail please contact our service department to arrange service for this product or you also have the option of speaking with JL Audio Australia directly.
We are a FULLY AUTHORISED Australian retailer for JL Audio Australia.
This product will be shipped from our Sydney Warehouse and you are welcome to pick it up directly from our store in Sydney. This product is NOT DROP SHIPPED from overseas.
- Tech Specs
- Peak Power: 150 watts
- RMS Power: 75 watts
- Frequency Response:
- Impedance: 4 ohms
- Mount Depth: Shallow
- Cone Material: Injected Molded Polypropylene
- Voice Coil: High Temperature Voice Coils
- Type: Silk Dome Tweeter
- Magnet Material:
- In The Box
- JL Audio C3-650 6.5" 150w Component Car Speakers
No Reviews Available