JL Audio C2-650X 6.5" 100w 2-Way Coaxial Car Speakers
JL Audio C2-650X 6.5" 100w 2-Way Coaxial Car Speakers
( JL Audio C2650X)
- Australian JL Audio Warranty
- Purchase Guarantee (see T&C's)
- JL Audio C2-650 6.5" 2-Way Coaxial Speakers
- 60 RMS 4Ω / 100W Peak
- Polypropylene woofer with 0.75" silk dome tweeter
- Long-excursion woofer for dynamic mid-bass
- Versatile tweeter mounts with built-in protection
Overview
The JL Audio C2-650 2-way coaxial speakers deliver clean, dynamic sound with 60 W RMS power handling and 100 W peak. Featuring mica-filled polypropylene cones with butyl rubber surrounds, the 6.5-inch woofers provide accurate mid-bass and smooth midrange. The 3/4-inch silk dome tweeters ensure extended high-frequency response with minimal distortion, while the built-in crossover network optimizes frequency distribution. A 1-inch voice coil on a Kapton former, ferrite magnet structure, and 4-ohm impedance support efficient power handling. Sensitivity is 91 dB, frequency response spans 59 Hz to 22 kHz, and a compact 62 mm (2.44″) depth allows seamless vehicle integration for high-fidelity audio.
Key Features:
6.5" C2-650X 2-Way Coaxial Speakers
Delivers clean, dynamic sound with accurate mid-bass and smooth highs.
Power Handling
Supports 60 W RMS and 100 W peak for reliable, distortion-free performance.
High-Frequency Clarity
3/4-inch silk dome tweeters provide extended, smooth treble with minimal harshness.
Durable Construction
Mica-filled polypropylene cones with butyl rubber surrounds and ferrite magnet structure ensure reliability.
Built-In Crossover
Optimizes frequency distribution between woofer and tweeter for balanced sound.
Adjustable Tweeter Level
Three-position tweeter attenuation allows customization of high-frequency output.
Efficient Voice Coil
1-inch Kapton former voice coil supports accurate response and power handling.
Wide Frequency Response
Covers 59 Hz to 22 kHz for full-range audio clarity.
High Sensitivity
90.5 dB sensitivity ensures strong output with moderate power.
Compact Design
62 mm (2.44″) depth allows easy integration into most vehicle locations.
| General Specifications | |
| Continuous Power Handling (RMS) | 60 W |
| Recommended Amplifier Power (RMS) | 15 - 100 W / Ch. |
| System Efficiency | 91 dB @ 1 W / 1 m |
| System Nominal Impedance | 4 Ω |
| System Frequency Response | 59 Hz - 22 KHz ± 3 dB |
| Coaxial Physical Specifications | |
| Frame Outer Diameter* (A) | 6.5 in / 165 mm |
| Grille Tray Outer Diameter (B) | 6.84 in / 174 mm |
| Motor Outer Diameter (C) | 3.15 in / 80 mm |
| Frontal Coaxial Tweeter Protrusion** (D) | 0.45 in / 12 mm |
| Frontal Grille Protrusion*** (E) | 0.85 in / 22 mm |
| Mounting Hole Diameter (F) | 5.56 in / 141 mm |
| Mounting Depth (G) | 2.44 in / 62 mm |
|
*Does not take into account mounting tabs |
|
- 1 x JL Audio 6.5" 2 WAY 60 RMS 4Ω
Peace of Mind Purchase Guarantee
This product is supplied via JL Audio Australia and enjoys the FULL benefits of the 'Genuine JL Audio Australian Warranty'. (You may also be entitled to other consumer warranties as provided by the Australian Consumer Guarantee and these entitlements are not limited by this warranty). In the event that this product should fail please contact our service department or you can speak with JL Audio Australia directly.
We are a FULLY AUTHORISED Australian retailer for JL Audio Australia.
Disclaimer
Due to differing operating costs associated with selling products via different marketplaces, our pricing may vary.














The information below is required for social login
Sign In
Create New Account