an Extra 5 %
off
an Extra 5 %
off
an Extra 5 %
off
JL Audio C2-600 6" 100w Component Car Speakers
Check out the JL Audio C2-600 6" 100w Component Car Speakers's Key Features
(JL AUDIO C2600)
- 12 Month JL Audio Australian Warranty
- Risk Free Purchase Guarantee (bottom of page)
- 4 Ohm
- C2 Series 6" Component Car Speakers
- 100 Watts Peak Power
- 60 Watts RMS Power
- Polypropylene cone
- Butyl rubber surround
2-Way Component System: 6-inch (150 mm) Woofer, 0.75-inch (19 mm) Silk Dome Tweeter
The Evolution C2 systems deliver sparkling high-frequency detail, smooth mid-range and powerful mid-bass, thanks to real silk dome tweeters and long linear excursion woofer designs.
The C2-600 system features 6-inch (150 mm) component woofers with mineral-filled polypropylene cones, long excursion capabilities and stamped steel frames. The woofer design benefits from JL Audio's vast woofer design experience and advanced modeling systems.
The 6-inch (150 mm) format is a direct fit in many Japanese vehicles where a full-size 6.5-inch speaker (165 mm) will not fit without modification. Multiple mounting patterns are provided on the woofer frame for easy installation into most vehicles that accept a 6-inch (150 mm) speaker.
The C2 component tweeters are built with 0.75-inch silk dome diaphragms that deliver smooth, extended response, on and off axis. Flush-mounting and surface-mounting fixtures are included to fit a wide variety of installation needs.
C2 crossover networks are compact and built with premium component parts, including Mylar® capacitors and segmented air-core inductors. Three levels of tweeter attenuation are provided, as well as a tweeter protector.
Woofer grilles are included, each consisting of a black grille tray with satin silver accents and a black steel mesh grille with an electroformed JL Audio logo.
Sonic character: Clean and Dynamic
Sold as a pair.
| General Specifications | |
| Continuous Power Handling (RMS) | 60 W |
| Peak Music Power | 225 W |
| Recommended Amplifier Power (RMS) | 15 - 100 W / Ch. |
| System Efficiency | 90.5 dB @ 1 W / 1 m |
| System Nominal Impedance | 4 Ω |
| System Frequency Response | 59 Hz - 22 KHz ± 3 dB |
| Woofer Physical Specifications | |
| Frame Outer Diameter* (A) | 6.21 in / 158 mm |
| Grille Tray Outer Diameter (B) | 6.51 in / 163 mm |
| Motor Outer Diameter (C) | 3.15 in / 80 mm |
| Frontal Coaxial Tweeter Protrusion (D) | N/A |
| Frontal Grille Protrusion** (E) | 0.91 in / 23 mm |
| Mounting Hole Diameter (F) | 5.00 in / 127 mm |
| Mounting Depth (G) | 2.38 in / 60 mm |
|
*Does not take into account mounting tabs |
|
| Tweeter Physical Specifications | |
| Flush Mount Fixture Diameter (A1) | 1.87 in / 48 mm |
| Surface Mount Fixture Diameter (A2) | 1.69 in / 43 mm |
| Flush Mount Mounting Hole Diameter (B) | 1.625 in / 41 mm |
| Flush Mount Mounting Depth (C) | 0.76 in / 19 mm |
| Flush Mount Tweeter Frontal Protrusion (D1) | 0.29 in / 7 mm |
| Surface Mount Tweeter Frontal Protrusion (D2) | 0.92 in / 23 mm |
| Crossover Physical Specifications | |
| Width (W) | 3.36 in / 85 mm |
| Depth (H) | 1.44 in / 37 mm |
| Depth (D) | 4.72 in / 120 mm |
- JL Audio C2-600 6" 100w Component Car Speakers
Peace of Mind Purchase Guarantee
This product is supplied via JL Audio Australia and enjoys the FULL benefits of the 'Genuine JL Audio Australian Warranty'. (You may also be entitled to other consumer warranties as provided by the Australian Consumer Guarantee and these entitlements are not limited by this warranty). In the event that this product should fail please contact our service department or you can speak with JL Audio Australia directly.
We are a FULLY AUTHORISED Australian retailer for JL Audio Australia.
Disclaimer
Due to differing operating costs associated with selling products via different marketplaces, our pricing may vary.
The information below is required for social login
Sign In
Create New Account