Saramonic SR-VRM1 XLR Digital Audio Recorder

Delivery and In-Store Pickup: As this product may be located at an external warehouse delivery times may be delayed by up to 48 hours. In-store pickup may not be available on this item.

Check out the Saramonic SR-VRM1 XLR Digital Audio Recorder's Key Features
(Saramonic SRVRM1)

• Genuine Australian Saramonic Warranty
• Peace of Mind Purchase Guarantee (bottom of page)
• Compact device that connects to XLR mics and records broadcast-quality sound to MicroSD
• Provides +48 volts of phantom power to condenser microphones
• Dedicated 3.5mm headphone jack with independent volume control
• 200Hz low-cut filter eliminates distracting vibration sounds and improves intelligibility
• Easy to use and features durable, all-metal construction
  
  

Overview

The Saramonic SR-VRM1 is a compact, "plug-on" audio recorder that you can directly connect to XLR microphones in order to create broadcast-quality recordings with resolutions up to 24bit 48kHz. The SR-VRM1 can provide +48 volts of phantom power to condenser microphones, which gives you the flexibility to use any kind of XLR microphone. The SR-VRM1 records Broadcast Wave Files to MicroSD and MicroSDHC cards, and a headphone jack with independent volume control is provided so you can listen while you record and hear playback.

The XLR connector on the SR-VRM1 features a locking mechanism that firmly holds the attached microphone in place. You can connect a handheld dynamic or condenser interview microphone, like the Saramonic SR-HM7 (sold separately), and record hours of audio without worrying about wireless dropouts or interference. You can connect a professional shotgun microphone, supply it with phantom power, and use it on a boompole or a stand. You can also connect a wired lavalier mic, like the Saramonic XLavMic-O (sold separately), and slip the SR-VRM1 into a pocket.

Like all Saramonic products, the SR-VR1 is easy to use. Navigating the menus with its backlit display is simple. You can easily adjust the headphone volume, change the recording level, and turn the low-cut filter on or off. The durable, all-metal construction of the SR-VRM1 was built to survive the not-so-gentle world of production. In addition to impressive sound quality, the SR-VRM1 efficiently utilizes power. It gets 8 hours of operation time from 2 AA batteries, 5 hours with phantom power. It’s compatible with up to 32GB MicroSDHC cards (sold separately).

Recording Media
MicroSDHC card (4GB-32GB) or MicroSD card (64MB-2GB)

Recording/Playback Format
16/24bit, 24/48kHz, mono/poly BWF

Input Connector
XLR jack (Female), 1GND / 2HOT / 3COLD

Mic Input Level
Selectable at -12dBu - +33dBu

Headphone Jack
1/8” (3.5mm)

Frequency Response
20Hz~22kHz +/-2dB

Distortion
0.05% (1kHz sine wave)

S/N ratio
92dB or higher

Battery Type
2x AA Battery (alkaline, NiMH or lithium)

Power Consumption
0.65W (Maximum)

Phantom Power
+48V

• 1 x Saramonic SR-VRM1 XLR Compact XLR Digital Audio Recorder