DS18 PRO 500W 8" Neodymium Speaker 2Ω - Single

DS18 PRO 500W 8" Water Resistant Neodymium Speaker 2Ω - Single
(DS18 PRO-M8.2NEO)

We Think You Should Know

• Australian DS18 Warranty
• Purchase Guarantee (see T&Cs)
• Sold in single units
• Designed in the U.S.A
• 8" Full-Range Speaker
• 500W Peak / 250W RMS Power
• 2 Ohms Impedance
• 96dB Sensitivity
• Neodymium Magnet
• Water Resistant Cone

Overview

PRO 8” Water Resistant Neodymium Full-Range Loudspeaker 500W 2-Ohm

Designed for motorcycle audio enthusiasts everywhere, DS18’s PRO-M8.2NEO is built to deliver the highest quality sound even in the most demanding open-air environments. Rain or shine, you can ride with confidence, knowing that the PRO-M8.2NEO is water resistant, ensuring your speaker investment remains protected. We've reinforced crucial components to withstand the harshest vibrations, allowing you to push your motorcycle to its limits without compromising on audio quality.

The attention to detail is evident in the PRO-M8.2NEO's construction. The frame is made of sturdy aluminium, ensuring durability and longevity. The cone, composed of fibreglass with a foam composite paper cone, strikes the perfect balance between rigidity and flexibility, delivering accurate and distortion-free sound reproduction.

Powered by the remarkable Neodymium motor, these speakers offer superior strength and power efficiency, enabling them to produce crisp, clear sound even at lower volume levels. With a 2-ohm load configuration, you can effortlessly harness the full potential of your amplifier, eliminating the need for complex wiring or bridging amps.

With an impressive RMS power handling of 250W and a MAX power handling of 500W, the PRO-M8.2NEO’s pack a punch, ensuring a dynamic audio experience that will leave you craving for more. Experience the full spectrum of sound, from the deep rumble of the bass to the crisp clarity of high frequencies, with the PRO-M8.2NEO's extraordinary frequency response range of 60Hz to 16KHz.

Designed with your needs in mind, the PRO-M8.2NEO combines water resistance, durability, and outstanding audio performance to create a truly immersive riding experience.

DS18 Car Audio - The Company

DS18 is a leading electronics manufacturer specializing in Mobile, Marine and Home Electronic equipment, headquartered in Miami, FL, USA. DS18 was created and developed by a team of young and determined professionals who understand the needs of today’s audio industry—offering several series of amplifiers, speakers, subwoofers, tweeters, midranges, cables, accessories, component sets and much more DS18 guarantees to satisfy customers seeking a wide assortment of products.

SPECS

SKU
PRO-M8.2NEO
Nominal Diameter
8"
Nominal Impedance
2 ohms
RMS Power Handing
250 WATTS
Maximum Power Handing
500 WATTS
Sensitivity (1w/1m)
96dB
Frequency Response
60Hz-16KHz
Recommended Hi Pass Crossover
120 Hz

SPECS

Voice Coil Diameter
1.5"
Voice Coil Former Material
Kapton
Winding Material
CCAW
Basket Material
Aluminium
Magnet Weight

THIELE & SMALL PARAMETERS

Vas
30.790Ltr
Xmax

Fs
62.827 Hz
Qms
7.7726
Qes
0.334
Qts
0.320
Re
2 ohms

MEASUREMENTS

Overall Diameter
8.2" / 209.3mm
Front Mount Baffle Cutout
7.26" / 183mm
Mounting Depth
3.34" / 84.92mm
Overall Depth
3.66" / 93mm
Product Weight
4 lbs
Product Dimensions
8.5 x 8.5 x 4.25

• 1 x DS18 PRO 500W 8" Water Resistant Neodymium Speaker 2Ω - Single
• Sold in single units (not pairs)