- Product Info
Joby Action Clamp & Locking Arm
We think YOU should know
- Genuine Australian Joby Warranty
- Peace of Mind Purchase Guarantee (bottom of page)
- Removeable GoPro Mount
- Action Series Locking arm
- Sliding and Screwing action clamp
Removable GoPro Mount
Remove the included Tripod Mount for GoPro and screw on a Contour or Sony ActionCam on the 1/4"-20 screw. The tripod mount can be used with any tripod.
Action Series Locking Arm
Two articulating ball joints let you position your GoPro at any angle. Lock the arm in place with the tightening knob strong, vibration-resistant stability.
- Two locking arm pivot points
- Position your video camera at any angle you need with two pivot points that can rotate 360° and pivot 180° side to side
- Lock your arm into place
- Tighten the arm to get a long-lasting, vibration-resistant angle for your video camera
The sliding locking arm moves quickly to accommodate to surface as thin as a stop sign or a table up to 2"/5 cm, in width. Swrewing arm locks the sliding locking arm in place.
- Sliding locking arm
- Ingenious sliding design lets you quickly close the gap on surfaces and locks automatically as you tighten the screwing arm.
- Screwing locking arm
- Start with the screwing locking arm at its most unscrewed, close the gap first with the sliding locking arm, and then tighten the screw to get a firm, tight hold.
Please Note: Digital Cameras used in these images are there for display purposes only and are not included with this Joby product.
Peace of Mind Purchase Guarantee & Declaration of Warranty
This product is supplied directly via Joby Australia and enjoys the FULL benefits of the 'Joby - Australian Warranty'. (You may also be entitled to other consumer warranties as provided by the Australian Consumer Guarantee and these entitlements are not limited by this warranty). In the event that this product should fail please contact our service department to arrange service for this product or you also have the option of speaking withJoby Australia directly.
NO Frills Electronics IS an AUTHORISED Australian retailer for Joby Australia.
This product will be shipped from our Sydney Warehouse and you are welcome to pick it up directly from our store in Sydney. This product is NOT DROP SHIPPED from overseas.
- Tech Specs
- Action Cam
- Tripod Mount for GoPro 1/4"-20 tripod
- Locking Arm 51.3 x 22 x 112.7 mm | 2 x 0.87 x 4.4 in
- Action Clamp: 69.1 x 32 x 129.6 mm | 2.72 x 1.25 x 5.1 in
- Mount for GoPro: 30.7 x 31 x 27.5 mm | 1.21 x 1.22 x 1.08 in
- Locking Arm: 40 grams | 1.4 ounces
- Action Clamp: 85 grams | 2.9 ounces
- Tripod Mount for GoPro®: 8 grams | 0.28 ounces
- ABS plastic
- Glass-filled nylon
- Stainless Steel
- In The Box
- Joby Action Clamp & Locking Arm
No Reviews Available