Boss Audio AR16004 1600W 4 CH Car Amplifier
- Product Info
Boss Audio AR16004 1600W Monoblock Amplifier
We Think YOU Should Know
- 12 Month Australian Warranty
- Risk Free Purchase Guarantee (bottom of page)
- 1600W MAX Power, 4 Channel 150 W X 4 RMS @ 4 ohm
- Full Range, Class A/B, MOSFET Power Supply
- Fixed High Pass Crossover, Variable Low Pass Crossover, Variable Bass Boost
- Inputs: High and Low Level
2 Ohm Stable
The lowest impedance accepted by this amplifier is 2 ohms. Amplifiers that are 2 ohms stable produce more power resulting in more volume. This amp can comfortably power speakers or subwoofers with all channel(s) being used at a load of 2 ohms.
This feature is built-in to the amplifier and allows you to adjust the amount of bass going to your subwoofers or speakers. Depending on the amplifier the adjustments range is from 0 to 12dB or 0 to 18dB.
Class A/B amplifiers have long been known for their ability to produce great quality sound while performing more efficiently than pure Class A amplifiers. We have developed a specific linear circuitry that further reduces distortion while increasing both sound quality and power output.
Built-in crossovers enable you to tailor the audio to your system’s needs. A High-Pass filter allows only the frequencies above the set frequency to pass through to your full range or component speakers and a Low-Pass filter allows only the frequencies below the set frequency to pass through to your subwoofers so your speakers and subwoofer[s] can perform more efficiently and effectively.
High and Low Level Inputs
An amplifier with both high-level and low-level inputs provides flexibility by allowing you to build an audio system using virtually any standard factory or aftermarket source unit. High-level (speaker level) inputs accept the signal from the speakers, while low-level (RCA) inputs accept the signal from the pre-amp outputs of the source unit.
If the amplifier gets too hot, the thermal protection circuit turns the amp off and allows the amp to cool down before turning it back on. If a speaker fails causing an electrical short, the protection circuit will automatically cut the output and remain in that state until the short is resolved. These safety features give you peace of mind knowing the amplifier is constantly monitoring conditions to protect itself.
Subwoofer Level Control
The wired remote subwoofer level control, mountable for easy access, has long been a popular feature on many of our amplifiers. The remote allows you to control the output level of the subwoofer(s) as needed for optimum sound according to your personal taste and listening environment.
Peace of Mind Purchase Guarantee & Declaration of Warranty
This product is directly imported and is offered with a full Australian 12 month warranty. (You may also be entitled to other consumer warranties as provided by the Australian Consumer Guarantee and these entitlements are not limited by this warranty). In the event that this product should fail please contact our service department to arrange service for this product.
We are not linked or associated with BOSS Corporation.
Our decision to import this product is in line with our company objectives to 'Offer our Customers the very best prices on the world's biggest brands and make sure our service is second to none'.
This product will be shipped from our Sydney Warehouse and you are welcome to pick it up directly from our store in Sydney. This product is NOT DROP SHIPPED from overseas.
- Tech Specs
Boss Audio AR1600.4
Full Range, Class A/B
Power Supply Type
MOSFET Power Supply
Total Power Output
Peak Power @ 2 Ω
400 Watts x 4
Bridged Peak Power @ 4 Ω
800 Watts x 2
RMS Power @ 4 Ω
150 Watts x 4
T.H.D. (Total Harmonic Distortion)
Channel Separation ≥
S/N Ratio (A-Weighted)
9 Hz to 50 kHz ±1 dB
CONNECTIONS, CONTROLS AND PROCESSING
High Level Inputs
Low Pass Filter
35 Hz to 160 Hz
Fixed Hz 200 Hz
Variable to 18 dB
Subwoofer Level Control
No Reviews Available