Nikon SB-R200 Wireless Speedlight Flash

Check out the Nikon SB-R200 Wireless Remote Speedlight Flash's Key Features
(Nikon SBR200)

• Genuine Nikon Australian 1 Year Warranty
• Peace of Mind Purchase Guarantee (bottom of page)
• Compact and lightweight remote Speedlight unit perfect for close-up and general photography
• Easy-to-set analog controls offers quick changes of settings
• i-TTL flash control for accurate flash exposures in close-up and other lighting applications
• Offers four independent channels for shooting in competitive environments
• Supports the Nikon Creative Lighting System (CLS) and compatible CLS cameras
• Built-in target light and AF Illuminator allows for proper position of Speedlight on the subject as well as autofocus operation in low-light situations
• Can be set to one of three Speedlight groups (A, B or C)
• Integrates perfectly into multiple flash situations including the SB-900, SB-800 and SB-600 Speedlight units
  
  

Overview

The Nikon SB-R200 is a portable wireless remote speedlight flash unit for Nikon Advanced Wireless Lighting system. The Wireless Remote Speedlight SB-R200 offers a guide number of 14/46 (ISO 200, m/ft.), and can be attached to the front of the lens via the Attachment Ring SX-1, held in the photographer's hand, or freely positioned by using the Speedlight Stand AS-20, which is supplied with the SB-R200.

Nikon Corporation

One of the world's largest and most respected photographic companies turned 100 this 2017. Nikon was one of the innovators of the DSLR camera and was the first company to enable video recording on a DSLR camera, in fact NASA called on Nikon to provide the photographic equipment on the Space Shuttle. No longer in the shadow of its competitors, Nikon now stands up as a world leader if not the world leader in digital photography and we believe that Nikon always represents great value and even better technology.

Commander Function
No

Remote Function
Yes

Guide Number
10m/33ft. (at ISO 100) to 14m/46ft. (at ISO 200)

Electronic Construction
Automatic Insulated Gate Bipolar Transistor (IGBT) and series circuitry (for wireless remote flash unit only)

Flash Exposure Control
i-TTL Balanced Fill-Flash with CLS compatible cameras
Manual Flash (with Nikon Creative Lighting System digital and 35mm SLR cameras)

Lens Coverage
24mm; 60° (vertical) and 78° (horizontal)

Minimum Recycling Time
6.0 sec. or less (approx.)

Flash Duration
1/1600 sec. (Approx.)

Required Power Source
One 3V CR123A lithium battery

Minimum Number of Flashes / Recycling Time
290 (Approx.)

Wireless Flash Modes
Remote

Wireless Communication Channels
Four: 1, 2, 3 and 4Channels

Wireless Groups
Three: A, B and C

Dimensions
3.1 x 3.0 x 2.2 in. (80 x 75 x 55mm) (Approx.)

Weight (Approx. without batteries)
4.2 oz. (120g)

• Nikon SB-R200 Flash Unit
• SS-R200 Soft case